by Nash Vail

Understanding Linear Interpolation in UI Animation

1*hSm61aoV3cwZRJQkQirOAA

In traditional (hand-drawn) animation, a senior or key artist draws keyframes that define the motion.

An assistant, generally an intern or a junior artist, then draws the necessary inbetweens for the scene. The job of the assistant, also called an inbetweener, is to make transitions between key poses look smooth and natural.

1*GI0WbHlZ7uBpOY0Xvkl5Cw

Inbetweens are necessary since animations without them appear choppy. Unfortunately, drawing in-betweens is more or less grunt work. But it’s the twenty-first century, and we have computers that can handle this type of task.

1*xnLjqe-1m6stF9pLUeTXkA
Choppy Animation

Remember what teachers told you in grade school about computers being dumb? Computers need to be told the exact sequence of steps to perform an action. Today we’ll look at one such sequence of steps, or algorithm, that helps the computer draw necessary inbetweens to create a smooth animation.

I’ll be using HTML5 canvas and JavaScript to illustrate the algorithm. However, you’ll be able to read and understand the article even if you aren’t familiar with them.

Intent

Our goal is simple, to animate a ball from point A(startX, startY) to B (endX, endY).

1*W-Fo7GodNwVwsV_9z33OzQ

If this scene were passed to a studio that does traditional animation, the senior artist would draw the following key poses…

1*-Kq3EdW2sv_qUPy6skk6qQ

…and then pass the drawing board to a junior artist to draw inbetweens like so.

1*99zCw2qgEd2O32tSl_ZU4g

For our situation, there is no animation studio nor do we have junior artists. All we have is a goal, a computer, and the ability to write some code.

Approach

The HTML code is simple, we only need one line.

<canvas id=”canvas”></canvas>

This part of the JavaScript code (shown below) simply grabs <canvas/> from the Document Object Model (DOM), gets context, and sets the width and height property of the canvas to match the viewport.

const canvas = document.getElementById(‘canvas’),  context = canvas.getContext(‘2d’),  width = canvas.width = window.innerWidth,  height = canvas.height = window.innerHeight;

The function below draws a green solid circle of radius radius at x and y coordinates.

function drawBall(x, y, radius) {  context.beginPath();   context.fillStyle = ‘#66DA79’;  context.arc(x, y, radius, 0, 2 * Math.PI, false);  context.fill();}

All of the above code is boilerplate to set up our animation, here’s the juicy part.

// Point Alet startX = 50, startY = 50;
// Point Blet endX = 420, endY = 380;
let x = startX, y = startY;
update();function update() {  context.clearRect(0, 0, width, height);  drawBall(x, y, 30);  requestAnimationFrame(update);}

First of all, notice the update function being called right above its declaration. Second of all, notice requestAnimationFrame(update) which calls update repeatedly.

1*Zw30luTk6Y2yS2rheUF3yw
A Flipbook animation

Flipbook animation is a good analogy for the kind of program we’re writing. Just like repeatedly flipping through a flipbook creates the illusion of motion, repeatedly calling the update function creates the illusion of motion for our green ball.

One thing to note about the code above is that “update” is just a name. The function could have been named anything else. Some programmers like the names nextFrame, loop, draw, or flip because the function is repeatedly called. The important part is what the function does.

On each subsequent call of update, we expect the function to draw a slightly different image on the canvas than the previous one.

1*Gr1EShaIgQcYKCxfp0TzSQ

Our current implementation of update draws the ball at the same exact position on each call drawBall(x, y, 30). There is no animation, but let’s change that. Below is a pen that contains the code we have written so far, you can open it and follow along.

1*KgTqUC2mKagPNnxxsuWGpQ

On each iteration of update let’s go ahead and increment the value of x and y and see the kind of animation it creates.

function update() {  context.clearRect(0, 0, width, height);  drawBall(x, y, 30);  x++; y++;  requestAnimationFrame(update);}

Each iteration moves the ball forward in both the x and y directions, and repeated calls of update results in the animation as shown.

1*Iyd6S-yGVdvF5G1TH5hWDA

Heres’ the deal though, our intent was to move the ball from a start position to an end position. But we’re doing absolutely nothing about stopping the ball at an end position. Let’s fix that.

One obvious solution is to only increment the coordinates when they are smaller than endX and endY values. This way, once the ball crosses endX, endY its coordinates will stop updating and the ball will stop.

function update() {  context.clearRect(0, 0, width, height);  drawBall(x, y, 30);   if(x <= endX && y <= endY) {    x++;    y++;  }   requestAnimationFrame(update);}

There’s an error in this approach though. Do you see it?

The problem here is that you cannot make the ball reach any end coordinate you want just by incrementing x and y values by 1. For example, consider end coordinates (500, 500), of course if you start at (0, 0) and add 1 to x and y, they will eventually get to(500, 500). But what if I chose (432, 373) as end coordinates?

Using the above approach, you can only reach points lying in a straight line 45 degrees from the horizontal axis.

1*HSmtd5gcIYYnAVmU5t3L0w

Now you can use trigonometry and fancy math to calculate precise amounts that x and y should be incremented by to reach any coordinate you want. But you don’t need to do that when you have linear interpolation.

Approach with linear interpolation

Here’s what linear interpolation function a.k.a lerp looks like.

function lerp(min, max, fraction) {  return (max — min) * fraction + min;}

To understand what linear interpolation does, consider a slider with a min value on the left end and a max value on the right end.

1*G5vGdPXQhec7hnOmBSJZkA
min = 0, max = 100

The next thing we need to choose is fraction. lerp takes fraction and converts that to a value between min and max.

1*DFXftmJxkHo5P_E94ElwMQ
min = 0, max = 100, fraction = 0.5

When I put 0.5 in the lerp formula — no surprises — it translates to 50. This is exactly the halfway point between 0 (min) and 100 (max).

Similarly, if we choose another value for fraction say 0.85

1*ytUp7zQTmzwiRmPAIEMyIQ
min = 0, max = 100, fraction = 85

And if we let fraction = 0, lerp will output 0 (min) and on fraction = 1, lerp will produce 100 (max).

I chose 0 and 100 as min and max to keep this example simple, but lerp will work for any arbitrary choice of min and max.

1*Ik-7ASOSmqFmKNwytsA8qg
min = 18, max = 37, fraction = 0.73

For values of fraction between 0 and 1, lerp allows you to interpolate between min and max. Or in other words, traverse between min and max values, where choosing 0 for fraction puts you at min, choosing 1 puts you at max and for any other value between 0 and 1, puts you anywhere between min and max. You can also see min and max as key poses, like in traditional animation, and lerp outputs as inbetweens ;-).

Alright, but what if someone gives a value outside the bounds of 0 and 1 as fraction to lerp? You see the formula for lerp is extremely straightforward with most basic of mathematical operations. There’s no trick or bad values here, just imagine extending the slider in both directions. Whatever value for fraction is supplied, lerp will produce a logical result. We shouldn’t pay much thought to bad values here though, what we should think about is how all of this maps to animating the ball.

If you’re following along go ahead and change the update function to match the following code. Also don’t forget to add in the lerp function we defined at the beginning of this section.

function update() {  context.clearRect(0, 0, width, height);  drawBall(x, y, 30);  x = lerp(x, endX, 0.1);  y = lerp(y, endY, 0.1);  requestAnimationFrame(update);}

Here’s a pen of what our program looks like now. Try clicking around :)

Smooth right? Here’s how lerp helps to improve the animation.

In the code, notice the variables x and y — which are initially set to startX and startY— mark the current position of the ball in any frame. Also my choice of 0.1 as fraction is arbitrary, you can choose any fractional value you want. Keep in mind that your choice of fraction affects the speed of the animation.

In every frame x and endX are taken as min and max and interpolated with 0.1 as fraction to obtain a new value forx. Similarly y and endY are used as min and max to obtain a new value for y using 0.1 as fraction.

1*vUfujdUFficArMFoNqEN7A

The ball is then drawn at the newly calculated(x, y) coordinate.

1*W1x88vpgSUD7BidIeHG5Eg

These steps are repeated until x becomes endX and y becomes endY in which case min = max. When min and max become equal lerp throws the exact same value(min/max) for any further frames thus stopping the animation.

And that is how you use linear interpolation to smoothly animate a ball.

This short article covers a lot. We started by defining terms like key poses and inbetweens. Then we tried a trivial approach for drawing inbetweens and noticed its limitations. Finally, with linear interpolation, we were able to achieve our intent.

I hope all the math made sense to you. Feel free to play with linear interpolation even more. This article was inspired by Rachel Smith’s post on CodePen. Rachel’s post has many more examples, be sure to check it out.

Looking for more? I publish regularly on my blog at nashvail.me. See you there, have a good one!

1*JZ2patu496gPkJOYXhb9MA